How To Use A Ninja Blender

NINJA Blender Owner's Manual

BL642ANZMN

IMPORTANT Condom INSTRUCTIONS

For Household Use But

WHEN USING Electrical APPLIANCES, Basic SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE Following:

READ ALL INSTRUCTIONS Before USING YOUR NUTRI NINJA® | NINJA® BLENDER DUO WITH Motorcar-IQ® TECHNOLOGY.

Warning: Extension cords are not recommended for use with this production.

WARNING: The blades are not affixed to the unit of measurement. They are removable and very sharp. Handle with intendance!

CAUTION: ln order to avoid a run a risk due to inadvertent resetting of the thermal cutting-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off past the utility.

Of import: This appliance is non intended for utilize by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children shall not use or play with this appliance. Close supervision is necessary to keep apparatus and string out of attain of children during employ.

Save THESE INSTRUCTIONS

WARNING:
TO REDUCE THE RISK OF Burn down, ELECTRIC Stupor OR INJURY:

Alarm: Remove utensils prior to processing. Failure to remove may cause the jar to exist damaged or to shatter which may crusade personal injury.
Warning: The blade assemblies are precipitous, not locked in place and removable, handle with intendance. When handling the blade assemblies, always hold past the shaft. Failure to do so will result in a gamble of laceration.
WARNING: Stacked Blade Assembly is sharp and not locked in place. If using the cascade spout, ensure the lid is fully locked onto the pitcher. If pouring with the chapeau removed, advisedly remove the Stacked Blade Assembly beginning, property it by the shaft. Failure to practice so will issue in a risk of laceration.
Caution: Do non blend hot liquids, doing and so may cause excessive pressure build-up, resulting in risk of the user being burned.
CAUTION: We do non recommend grinding in any of our Nutri Ninja® Cups.
Circumspection: Remove the Pro Extractor Blades Associates from the Nutri Ninja Cup upon completion of blending. Do not shop ingredients earlier or after blending them in the loving cup with the blade assembly attached. Some foods may comprise agile ingredients or release gases that volition aggrandize if left in a sealed container, resulting in excessive pressure buildup that can pose a chance of injury. For ingredient storage in the cup, use only Sip & Seal® Chapeau or spout hat to cover.
CAUTION: Exercise non blend dry ingredients unless pulsing for curt intervals per the instructions. Continuous blending dry ingredients will overheat the blender.
To protect against electrical stupor, do non sub merge the appliance or allow the power cord to come into contact with water or any other liquid.
DO NOT permit the appliance to be used by children. Shut attention is necessary when used well-nigh children. This is not a toy.
Never get out an appliance unattended when in use.
Turn the appliance off and remove the power cord from the electric outlet when not in use, before assembling or disassembling parts, accessing parts that move while in use and before cleaning. To unplug, grasp the plug and pull from the electrical outlet. Never pull from the power string.
Practise NOT abuse the power cord. Never carry the appliance by the power cord or yank it to disconnect from electrical outlet; instead, grasp the plug and pull to disconnect.
DO Non utilise with damaged supply string or plug. If the supply cord or plug is damaged, it must be replaced by the manufacturer, a service center or similar qualified persons in order to avert chance.
Exercise Non Utilise if the apparatus is non working, has been dropped, dropped into h2o, damaged or left outdoors.
NO SERVICEABLE PARTS. Incorrect re-assembly or repair tin can cause a run a risk of electrical shock or injury to persons when the appliance is used. Contact Client Service or a Service Center for the repair or replacement nether the warranty agreement.
E'er apply the appliance on a dry out, level surface.
Keep hands, hair, clothing, besides as utensils out of container while processing or blending to reduce the risk of severe injury to persons or impairment to the appliance. A scraper may exist used but merely when the appliance is not running.
Avert contact with moving parts.
DO Non effort to sharpen blades.
DO NOT use the appliance if either ready of blades are aptitude or damaged.
To reduce the risk of injury, never get together the Stacked Blade Associates in the bullpen without the pitcher existence properly attached to the motor base.
Practice NOT operate this appliance on or near any hot surfaces (such as gas or electrical burner or in a heated oven).
The use of attachments or accessories including canning jars, not recommended by the manufacturer may result in fire, electric daze or personal injury.
Practise Non remove whatever container from the motor base of operations while the appliance is in operation. Always unplug the unit when non in use.
To reduce take chances of injury, never identify the blade assemblies on the base without the bullpen or Nutri Ninja® Cup properly attached.
To reduce the risk of injury, NEVER operate the appliance without the chapeau in place; Practise Non try to defeat or bypass the interlock machinery. When using the removable blades, brand sure they are properly installed before operating the appliance.
DO Non expose containers to extreme temperature changes.
Practice Not overfill. Practice NOT exceed "MAX" fill line.
Exercise NOT let the power string hang over the border of table or counter or touch hot surfaces such as the stove.
DO Not operate the apparatus empty.
To reduce the hazard of burns, ever allow the apparatus to cool before taking off parts and before cleaning.
Max ON time is 60 seconds nether 1500W load.
If the appliance overheats, a thermal switch will become activated and close off the motor. To reset, unplug the appliance and allow it absurd down for approximately 15 minutes before using again.
In the event that the unit overloads, the control panel lights will wink and the unit of measurement will close down.
Unplug the appliance and allow it cool down for approximately 15 minutes before using again.
Max PULSE iteration is 30 Pulses. After 30 Pulses allow 10 minutes to laissez passer before running the PULSE part upwards to an boosted thirty Pulses.
The maximum rating is based on the Stacked Blade Assembly (pitcher) that drives the greatest power and other recommended attachments may describe significantly less power or electric current.
To avoid injury, never attempt to place the Pro Extractor Blade™ Assembly onto the motor base without first assembling the blade assembly to the Nutri Ninja Loving cup.
Apparatus accessories are not intended to exist used in the microwave as it may result in damage to the accessories.
THIS PRODUCT IS INTENDED FOR HOUSEHOLD Utilise Just. Do non use this appliance for anything other than its intended utilise. Do not employ outdoors.
DO Not remove lid until bract has COMPLETELY STOPPED.
Do NOT endeavor operation without the cover being in place.
Practice NOT process liquid ingredients in the coffee grinder. Accessory is not intended for liquid processing.
Practice Non endeavour to chop ice in the coffee grinder.
Check stainless steel cup and java grinder for presence of foreign objects before using.

Getting To Know Your Nutri Ninja® | Ninja® Blender Duo with Automobile-iQ® Technology

a. 900ml Nutri Ninja Loving cup
b. 650ml Nutri Ninja Cup
c. 500ml Nutri Ninja Cup

d. Pro Extractor Blades™ Assembly
e. Sip & Seal® Lid

f. Pitcher
yard. Blender Lid with locking handle
h. Stacked Blade Assembly

i. Motor Base of operations

NOTE: Blades are not interchangeable.

The Nutri Ninja® | Ninja® Blender Duo with Car-iQ® Engineering is a loftier powered innovative tool with a sleek pattern and outstanding performance, a truthful asset to any kitchen. The Nutri Ninja | Ninja Blender Duo with Auto-iQ Technology features intelligent programs that combine pulsing, blending and pausing patterns that practice the work for you! Go not bad results every time with no guesswork required! For best results, be sure to advisedly read all the instructions independent in the transmission earlier using this appliance.

Nutri Ninja | Ninja Blender Duo with Automobile-iQ Engineering Features:

Patent Pending Ninja Blade Engineering science
BPA Costless Pitcher (maximum liquid chapters two Fifty), Nutri Ninja Cups and Lids
Total Burdensome™ Engineering science
Drip-Free Pour Spout
LED Control Panel with Timer
Sturdy, Non-Slip Base
Smart Lid technology for easy release
3 speeds: Depression, Medium & High
5 Auto-iQ Programs – Auto-iQ Frozen Drinks/Smoothies, Car-iQ Puree, Nutri Ninja Auto-iQ Blend, Nutri Ninja Auto-iQ Ultra Blend and Car-iQ Pulse
Nutri Ninja Nutrient & Vitamin Extraction*

*Extract a drink containing vitamins and nutrients from fruits and vegetables.

Before Kickoff Use

PLEASE Go on THESE IMPORTANT SAFEGUARDS IN MIND WHEN USING THE Appliance:

Important: Make sure that the motor base of operations is plugged in for apply.

Important: Never add together ingredients into the container before placing the attachment in offset.

Important: Attachments are non interchangeable.

Important: Practise NOT attempt to operate the appliance without the chapeau on.

IMPORTANT: Never run the appliance empty.

IMPORTANT: Appliance accessories are not intended to exist used in the microwave as information technology may result in damage to the accessories.

Alarm: Stacked Blade Assembly is abrupt and not locked in place. If using the pour spout, ensure the chapeau is fully locked onto the pitcher. Failure to do so will issue in a risk of laceration.

WARNING: Stacked Blade Assembly is abrupt and not locked in place.
If pouring with the hat removed, carefully remove the Stacked Blade Assembly beginning, holding it by the shaft. Failure to do then will result in a risk of laceration.

Caution: Do not immerse the motor base into water or whatsoever other liquid.

Remove all packaging material and labels from the appliance. Divide/remove all parts from each other.
Wash the lids, bullpen, Nutri Ninja Cups and bract assemblies in warm, soapy water. When washing the bract assemblies, use a dish-washing utensil with a handle to avert direct mitt contact with blades.
WARNING: Handle the bract assemblies with care when washing, every bit the blades are sharp.
Handle blade assemblies with care to avoid contact with sharp edges. Rinse and air dry thoroughly.
The bullpen, Nutri Ninja Cups, lids, and blade assemblies are all dishwasher rubber. It is recommended that the lids and blade assemblies exist placed on the top rack. Ensure the blade assemblies are removed from the containers before placing in the dishwasher.
Wipe the motor base of operations clean with a damp cloth.

Assembly and Use for the Ninja® Blender

WARNING: Handle the Stacked Blade Assembly with care, every bit the blades are sharp.
Warning: Remove utensils prior to processing. Failure to remove may crusade the bullpen to exist damaged or to shatter, which may crusade personal injury.
Alarm: Never go out the appliance unattended while in utilize.
CAUTION: Do not blend hot liquids, doing so may crusade excessive pressure level buildup, resulting in gamble of the user existence burned.
Important: Make sure that the motor base is plugged in for use.

ASSEMBLY

Review warning and caution statements in a higher place earlier proceeding to number ii.
Identify the motor base of operations on a clean, dry, level surface such as a counter tabletop.
Holding the Stacked Blade Assembly past the top of the shaft, place it onto the drive gear inside the pitcher.
Ensure that the Stacked Blade Assembly is seated properly and is standing upright. (Fig. i)
NOTE: The Stacked Blade Associates will fit loosely on the drive gear.
Align and lower the pitcher onto the motor base. (Fig. two) Handle should exist aligned slightly to the right of the "LOCK" symbol on the motor base.
Rotate the bullpen clockwise until information technology locks in place, you volition hear a click when the lock is engaged. (Fig. 3)
The pitcher can be placed on the motor base of operations ii ways; the handle can be on the front correct corner or the front left corner. (Fig. 4a, Fig. 4b)
Add together the ingredients to the pitcher, making sure that they exercise non exceed the highest measured marking line on the side of the pitcher.
Note: When blending any kind of liquids, such as mixtures of whatever drinks or smoothies, do not exceed the "MAX LIQUID" mark (2L) on the bullpen.
Annotation: If you need to add additional ingredients while the appliance is processing, open the pour spout cap and cascade the ingredients in through the opening.
Belongings the lid by the handle in the upright position, place it on summit of the pitcher adjustment the triangle () located on the lid with the triangle () located on the pitcher's handle. (Fig. 5a) Press the handle down until you hear a click.
The triangles on the lid and the blender handle MUST be aligned in society for the blender to turn on. (Fig. 5b)
Plug the power cord into the electrical outlet and press the power button ().
Important: As a safety characteristic, the power calorie-free () will flash and the motor will not work if the bullpen and hat are non installed correctly. When the pitcher and lid are installed properly, the power light () will be solid, indicating that the appliance is ready for utilise.
Annotation: Nutri Ninja® | Ninja Blender Duo with Automobile-iQ® Applied science tin sense which jar is on the motor base. The available function lights will illuminate depending on which jar is placed on the motor base. (Fig.half-dozen)
Review alert and circumspection statements at the tiptop of page viii before proceeding to number
Press the power button to turn on the unit. Select the speed or Auto-iQ program that all-time suits your needs. The Auto-iQ programme will finish the appliance automatically at the end of the program. (Fig. 7)
Notation: Pulse ingredients for even chopping by belongings the Motorcar-iQ Pulse push button until your desired consistency is reached.
Annotation: Max PULSE iteration is 30 Pulses. After 30 Pulses allow 10 minutes to pass before running the PULSE role up to an additional 30 Pulses.
To pause the appliance, press the selected speed or Auto-iQ programme a second time. When the program is paused, the light on the program button will flash until yous press it again to resume the residual of the programme.
When you have reached your desired consistency, stop the appliance by pressing the power button () and wait for the Stacked Blade Assembly to stop turning.
(Fig. 8)
Turn the pitcher anticlockwise to remove and then lift off the base. (Fig.9)
Circumspection: Never insert your hands in the pitcher as the blades are precipitous. Always apply a spatula to dislodge nutrient that has stuck to the sides of the bullpen.
Open the cascade spout cap and apply the spout to empty liquid contents. For thicker consistencies, first remove the hat past pressing the release button and pulling the lid handle upwardly to a 90 caste angle to lift lid off the pitcher. And then, carefully remove the Stacked Blade Assembly past the top of the shaft. Place Stacked Blade Assembly away from the piece of work expanse to avoid accidental contact. Finally, empty contents from the pitcher. (Fig. 10)
Make sure that the unit is unplugged when non in use. To release the motor base of operations from the counter or tabletop, place your hands underneath both sides of the motor base and gently pull the unit upwardly and towards you. (Fig. eleven)

Associates and Use for the Nutri Ninja® Cups

Warning: Handle the Pro Extractor Blades™ Assembly with care, as the blades are sharp.
Warning: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja Cup to exist damaged or to shatter, which may crusade personal injury.
WARNING: Never leave the appliance unattended while in use.
Circumspection: Exercise not alloy hot liquids, doing so may crusade excessive pressure buildup, resulting in gamble of the user being burned.
CAUTION: Remove the Pro Extractor Blades Assembly from the Nutri Ninja Cup upon completion of blending. Do non store ingredients earlier or after blending them in the cup with the blade associates attached. Some foods may contain agile ingredients or release gases that volition expand if left in a sealed container, resulting in excessive pressure buildup that can pose a risk of injury. For ingredient storage in the cup, employ only Sip & Seal® Hat or spout lid to comprehend.

Associates

IMPORTANT: When processing soft dry ingredients such as twenty-four hour period-former bread or cheese use quick, brusk 1 2nd pulses. Do not overfill to avert overheating the appliance. Allow the appliance to cool afterwards each apply.
Notation: Nutri Ninja | Ninja® Blender Duo with Car-iQ®
Technology can sense which jar is on the motor base.
The bachelor part lights volition illuminate depending on which jar is placed on the motor base of operations. (Fig. ane)

Review alarm and circumspection statements above earlier proceeding to number 2.
Identify the motor base on a clean, dry, level surface such equally a counter or tabletop. Press down on the motor base to make sure that the suction cups adhere to the counter or tabletop.
Add ingredients to the Nutri Ninja Cup.
Place the Pro Extractor Blades Associates onto the cup and tightly screw it on clockwise until y'all have a good seal. (Fig. ii)
Turn the Nutri Ninja Cup upside down and identify it onto the motor base of operations, aligning the tabs on the cup with the motor base. Rotate the Nutri Ninja Cup clockwise until it locks in identify, you lot will hear a click when the lock is engaged. (Fig. 3)

Utilize
Review warning and caution statements before proceeding.
Press the power button on, and select the speed or Auto-iQ program that suits your needs. (Fig. 4) The Auto-iQ programme will stop the appliance automatically at the end of the program.
To pause the appliance, printing the selected speed or Auto-iQ program a second time. When the program is paused, the light on the programme button will wink until you press it over again to resume the rest of the program.
Once y'all have reached your desired consistency, cease the appliance by pressing the power push button and wait for the Pro Extractor Blades Associates to stop turning. Turn the Nutri Ninja® Cup anticlockwise and pull direct upwards to remove. (Fig. 5, Fig. vi) REMOVAL
Annotation: Practice not overfill! To avert spilling, do not add together
ingredients by the "MAX" fill line.
Turn the loving cup upright and remove the Pro Extractor Blades Associates by twisting the Pro Extractor Blades Associates anticlockwise.
xi Do not shop blended contents with the Pro Extractor Blades attached.
Place the Sip & Seal Hat onto the Nutri Ninja Cup, twist to seal and relish.
For storage, just use Sip & Seal Lid to cover.
Exist sure to shop the Pro Extractor Blades attached to an empty cup when not in apply.
Note: Sip & Seal Hat not intended for use with the Xl Multi-serve 1.iv L Ninja Jar.
Make sure that the motor base is unplugged when not in utilise.
To release the motor base of operations from the counter or tabletop, place your easily underneath both sides of the motor base and gently pull the unit upwards and towards you.

Programs, Speed Settings & Uses for the Bullpen

FUNCTION	CONTAINER	Bract Blazon	SPEED or Program	Blazon OF FOOD
Processing	Pitcher	Stacked Blade Assembly	Auto-iQ® Puree Medium	Dips Batters
Chopping	Pitcher	Stacked Blade Assembly	Machine-iQ Pulse High	Salsa Vegetables Basics
Frozen Drinks / Ice Beat out	Bullpen	Stacked Blade Assembly	Auto-iQ Frozen Drinks/ Smoothies	Ice Frozen Drinks
Pureeing	Pitcher	Stacked Blade Assembly	Car-iQ Puree	Smoothies Soups* Milkshakes

Programs, Speed Settings & Uses for the Nutri Ninja® Loving cup

Role	CONTAINER	BLADE TYPE	SPEED or Program	Blazon OF FOOD
Smoothies	Nutri Ninja Loving cup Forty Multi-serve i.4 L Ninja Jar Stainless Steel Ninja® Loving cup	Pro Extractor Blades™ Assembly	Nutri Ninja Auto-iQ Alloy	Smoothies Frappes Milkshakes Protein Drinks
Green Smoothies	Nutri Ninja Loving cup XL Multi-serve ane.4 Fifty Ninja Jar Stainless Steel Ninja Cup	Pro Extractor Blades Assembly	Nutri Ninja Auto-iQ Ultra Blend	Frozen Fruits Frozen Vegetables Kale Celery Spinach Seeds Ice
Grating	Nutri Ninja Cup	Pro Extractor Blades Assembly	Auto-iQ Pulse High	Grated Cheese Bread Crumbs
Chopping	Nutri Ninja Cup	Pro Extractor Blades Associates	Motorcar-iQ Pulse High	Salsa Vegetables Basics

Circumspection: Do not blend dry ingredients unless pulsing for short intervals per the instructions.

Continuous blending dry out ingredients volition overheat the blender.
* When blending sauces and soups, brand sure they're cooled to room temperature showtime – Ninja® containers are not intended for hot blending.

Intendance & Maintenance

HOW TO CLEAN

Caution: Make sure that the motor base is unplugged from the power source before inserting or removing any attachment and before cleaning.
Circumspection: DO Non immerse the motor base of operations into h2o or whatsoever other liquid.

Divide/remove all parts from each other.
Mitt Washing: Launder the containers, lids, blade assemblies and attachments in warm, soapy water. When washing the blade assemblies, use a dish-washing utensil with a handle to avoid directly hand contact with blades. Handle bract assemblies with care to avoid contact with sharp edges. Rinse and air dry thoroughly.
Dishwasher: The containers, lids, blade assemblies and attachments are all dishwasher condom. The lids and blade assemblies are top rack dishwasher safe. Ensure that the bract assemblies are removed from the containers before placing in the dishwasher.
WARNING: Handle the Blade Assemblies with care when washing, every bit the blades are abrupt. Contact with the blades' edges can result in laceration.
Wipe the motor base clean with a damp cloth. If the appliance needs servicing, please call customer care at AU: 1800 099 385 or NZ: 0800 112 660.

HOW TO STORE

Store the Nutri Ninja® | Ninja® Blender Duo with Machine-iQ® Applied science upright with the blade assembly inside the respective container with the lid secured on summit. Practise not place anything on top. Store the residue of the attachments in a safe place where they volition not be damaged and won't cause damage. Loosely wrap the ability cord effectually the motor base.
NOTE: Practise not store blended or unblended ingredients in the Nutri Ninja Cup with the bract assembly attached.
RESETTING THE MOTOR THERMOSTAT
Store the Nutri Ninja | Ninja Blender Duo with Motorcar-iQ Technology features a unique rubber system which prevents damage to the unit'south motor and drive arrangement should yous inadvertently overload your apparatus.
If the appliance is being overloaded, the motor will stop. Permit the appliance to cool for approximately fifteen minutes. To reset the appliance, follow the resetting procedure below:

Unplug the appliance from the electrical outlet.
Remove and empty the container and ensure that no food is jamming the bract assembly.
Allow the apparatus to cool for approximately xv minutes.
Re-install the container onto the base and re-plug the appliance into the electric outlet.
Proceed to use the appliance as before making sure not to exceed the recommended maximum capacities.

Troubleshooting Guide

Problems	POSSIBLE REASONS & SOLUTIONS
Motor Doesn't Start or Blade Assembly Doesn't Rotate.	Make sure the container is securely placed on motor base of operations. Make sure the lid is securely on container in the correct position (align arrows). The appliance is turned "Off". Printing the power button () to turn "On". Check that the plug is deeply inserted into the electrical outlet. Check the fuse or circuit billow. The unit of measurement has overloaded. The appliance will cease and the power light will flash. Unplug and wait approximately 15 minutes earlier using again. The unit has overheated. Unplug and wait approximately fifteen minutes earlier using again. Bank check to make sure the unit of measurement is not overloaded.
Food is Unevenly Chopped.	Either you are chopping besides much nutrient at one time, or the pieces are non of fifty-fifty size and processing smaller amounts per batch.
Food is Chopped Besides Fine or is Too Watery.	The food has been over processed. Use Auto-iQ® Pulse push button for controlled processing.
Food Collects On Lid or On the Sides of the Container.	The mixture is besides thick. Add together more liquid.
You Cannot Accomplish Snow From Solid Ice.	Do not use ice that has been sitting out or has started to melt. Employ water ice direct from the freezer. Start with a few pulses and and then go to a continuous blending cycle.
Motor Base Won't Stick to Counter or Tabletop.	Make sure surface and suction feet are wiped make clean. Suction feet will only stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces such as, wood, tile and non-polished finishes. DO Not attempt to utilize appliance when the motor base is stuck to a surface that is non secure, (cutting board, platter, plates, etc.).
You lot get an "Err" Bulletin.	Your Ninja® is able to detect which jar is on the base. Y'all may be trying to use a plan that is not designed for the jar you lot have installed. The programs will light up indicating which programs are available for each jar.
Y'all have a blinking scarlet lite.	The unit of measurement is non installed properly. For your safety the unit will merely be able to be turned on when it is properly assembled. Delight refer to the assembly pages of this inspiration guide for aid.

I (one) YEAR
LIMITED REPLACEMENT WARRANTY STATEMENT

If your product becomes defective due to faulty cloth or workmanship within a period of 1 yr from the date of purchase, we warrant to do the following:
For New Zealand Consumers: We will supervene upon the product with a new product, gratis of accuse, or repair the product
at our price, at our discretion.
For Australian Consumers: Our appurtenances come with guarantees that cannot be excluded under the Australian Consumer Constabulary. Y'all are entitled to a replacement or refund for a major failure and for bounty for whatsoever other reasonably foreseeable loss or impairment. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Your warranty is subject to the following conditions:
Exercise NOT operate the appliance with a damaged plug or cord, or if the unit has been dropped, damaged or dropped in water. To avoid the risk of electric daze, do not disassemble or attempt to repair the appliance on your own. If the supply string is damaged, it must be replaced by a qualified electrician in order to avert a gamble. Wrong re assembly or repair can cause a run a risk of electrical shock or injury to persons when the appliance is used.
The product has not been misused, abused, neglected, altered, modified or repaired by anyone.
The production has been subjected to fair wear and tear.
The product has not been used for trade, professional or rent purposes.
The product has non sustained damage through foreign objects, substances or blow.

Your warranty does not embrace:

Components that are subject to natural wear and tear caused by normal employ in accordance with operating instructions.
Unauthorised/improper maintenance/handling or overload is excluded from this warranty.
For guarantee claims you will need to submit a proof of purchase in the form of a valid receipt that displays date and identify of purchase.

This warranty does not replace just is in addition to your statutory rights.
This warranty does not utilise to accessories supplied with the product.
This warranty applies just to the original purchaser and may not be transferred.
Replacement products will be covered by the limited warranty for the balance of the warranty period from the appointment of the original purchase.
Please annotation:

Only lacking product or parts returned to place of buy will be replaced under this warranty.

New Zealand Contact:
Brand Developers Limited
Unit H, 686 Rosebank
Avondale, 1026 Auckland, NEW ZEALAND
NZ Customer Intendance: 0800 002 999

Australia Contact:
Make Developers Aust Pty Ltd
Road, Unit 3, 2 Roussos Identify,
Truganina VIC 3029, Commonwealth of australia
AUST Customer Care: 1800 890 840

Isle of mann&Noble

Proudly distributed by

Mann&Noble Pty Ltd
No.1 Southridge Unit of measurement Estate
2 Southridge Street
Eastern Creek NSW
Australia, 2766

AU: 1800 099 385
NZ: 0800 112 660

world wide web.ninjakitchen.com.au

Auto-iQ, Ninja, Nutri Ninja and Sip & Seal are registered trademarks of SharkNinja Operating LLC.

Pro Extractor Blades and Total Burdensome are trademarks of SharkNinja Operating LLC.

Illustrations may differ from actual production. Nosotros are constantly striving to improve our products, therefore the specifications independent herein are subject field to alter without notice.

Ezoic

Documents / Resources

References

Ninja Kitchen Australia | Blenders, Kitchen Systems and Cooking American Limited Apple tree Pay Google Pay Mastercard PayPal Store Pay Visa